APPA 507 Process multimeter Calibrator

Product Introduction

Measurement Specification

• DC voltage : 50mV~1000V
• ACV : ACV 50mV~1000V
• DCA : 50mA~1A
• ACA : 50mA~1A
• 500Ω~50MΩ : 500Ω~50MΩ
• Diode Test : 2.000V
• Continuity Test : <30Ω, 2kHz tone buzzer
• Frequency Counter : 500Hz~100KHz
• Source/Simulate mode : DC 0mA to 24mA, 0.05% of span, 32V Output
• Loop Power mode : DC 50mA, 32V Output
• Loop supply : 30V/1,25kΩ
• Loop supply (HART) : 24V/1kΩ

Product Features

• Display : 50,000
• Sampling Rate : 10 times / sec
• Overload Indication : "OL" or "-OL"
• Low battery Indicator :
• Back light :
• Low Battery Indication : Battery Sign
• Auto Power Off : 20 minutes
• Operating Temperature : -10°C~50°C, ≤80%RH
• Storage Temperature : -20°C~60°C
• Temperature Coefficient : 0.1 x (Spec. Acc) / °C, <18°C, >28°C
• Safety : CAT IV 600V / CAT III 1000V
• Battery Life: in hours (Alkaline battery) : 100 hours
• Power Requirement : AA Size 1.5V x 4 Batteries (NEDA 15A/IEC LR6)
• Size: : W x L x D 95 x 207 x 52mm
• Weight : 630g
• Accessory : Included with instrument Test Leads, Alligator Clips, USB Cable, Software, Magnetic Hanging Kit, Alkaline Battery, Protective Holster

Product Information

• Working Environment : 0~50°C / lower than 80%RH without dew。
• Storage Environment : -20~60°C / lower than 90%RH without dew。
• Elevation Limitation : Lower than 1,000 meters
• Power Supply : 1.5V AAA x 4