Differential oscilloscope probe DP-30K ( 30KVp-p / 75MHz )

Product Introduction

Measurement Specification

• Range : 75MHz
• IN voltage : ≦ 1.5 KV DC for X200, (Approx. 1.1 KV RMS) ; ≦ 15 KV DC for X2000, (Approx. 7 KV RMS)
• Maximum Differential Voltage: : 30 KVp-p, or ± 15KVp-p Maximum Common Mode or Float Voltage: 7.5 KV DC or 15 KVp-p or 5 V RMS Maximum Voltage Between Input and Ground: 5 KV RMS Note: Maximum When the voltage is input, the time should not exceed 1 minute
• input resistance: : Differential: 81.6 MΩ // 1 pF Input impedance from single-ended to ground: 40.8 MΩ // 2 pF
• Noise suppression rate: : 60Hz: > 80dB ; 100Hz: > 60dB ; 1MHz: > 50dB
• Attenuation : X200, or X2000
• Power supply: : designated external 5 V DC power supply (must use the product designated by our company)
• Power consumption: : The maximum power consumption is about 0.5 A / 5 V DC

Product Features

• :

Product Information

• Operating Environment : 5 to 40°C / lower than 80%RH without dew
• Storage Environment : -20 to 50°C / lower than 80%RH without dew
• Dimension : 210 x 58 x 30 mm
• Dimensions; Weight : 220 x 85 x 30 mm; 350 g
• Accessory : test leads, power adopter, alligator cip, carrying box,