TECPEL DTM-319A Four-Channel Thermometer USB Data Logger 4CH

Product Introduction

DTM-319A is a K-type Thermocouple Temperature Data Recorder and suitable with many different K-type thermocouple probes. It can record four place's temperature at the same time . Very suitable for science experiment and products testing。 Q&A 4 Input Digital Thermometer DTM-319A is a battery operated K, J, E, T type temperature data logger with the sensor embedded in the unit. As mentioned in the product description, question 1, do you need an interface card for conversion when connecting each sensor to the main body? Can the 4 sensors measure temperature because the metals are different? Question 2 Is it possible to measure temperature by installing K, J, E, and T sensors at the 4 measurement ports? Is it basic to use the same sensor in all 4 places? to customers, Regarding the first question: DTM-319A thermocouple thermometer can use K, J, E, T four thermocouple temperature wires. When using, DTM-319A can only use 1 specification, so all 4 input signals need the same thermocouple format. For example, 4 k-TYPE thermocouple wires can be used. Regarding the second question: Different thermocouple wires cannot be used at the same time. When using different thermocouples, the signals of the 3 thermocouples other than the ones set correctly are inaccurate, so the displayed temperature will be different. The greater the difference between the measured temperature and the ambient temperature, the greater the error displayed on the thermometer. The error can be hundreds of degrees. Hope the above can be used as a reference.

Measurement Specification

Product Features

  • MAXIMUM AND MINIMUM FUNCTION :
  • T1 T2 DIFFERENCE (T1-T2) :
  • TEMPERATURE UNIT SELECTABLE : °C/°F
  • HOLD (HOLD) :
  • LOW BATTERY INDICATOR :
  • AUTO SHUT OFF : 30 Minutes
  • BACK LIGHT DISPLAY :
  • TRIPOD PLACED HOLE :

Product Information