GWinstek LCR-6000 Desktop LCR Meter, RLC
Product Introduction
Although the LCR-6000 series has been fully miniaturized, the functions it provides are richer and more diverse. First of all, the whole series uses a 3.5-inch color LCD display screen to present a wealth of display parameters~ In addition to displaying the setting conditions and the measurement results of the main/sub-parameters at the same time, two additional monitoring parameters are added; in short, the same screen , can display up to 4 parameter results, greatly improving the efficiency of measurement. In addition, the large value display mode switch is added, which not only emphasizes the measurement results, but also provides PASS/FAIL judgment in this mode, making the detection judgment faster and more convenient.
LCR-6002 desktop capacitance, inductance, and resistance tester use a color LCD screen to provide the most intuitive operation interface. It can output a detection signal of up to 2KHz and can detect a capacitance value of 0.00001p Farad (F).
5 Models (10Hz~2kHz/20kHz/100kHz/200kHz/300kHz)
LCR-6300: 10Hz～300kHz(±0.01%) (4 digits resolution)
LCR-6200: 10Hz～200kHz(±0.01%) (4 digits resolution)
LCR-6100: 10Hz～100kHz(±0.01%) (4 digits resolution)
LCR-6020: 10Hz～ 20kHz(±0.01%) (4 digits resolution)
LCR-6002: 10Hz～ 2kHz(±0.01%) (4 digits resolution)
Measurement Specification
Product Features
-
Loss measurement (D) :
-
Phase angle measurement (θ) :
-
Quality factor (Q) :
-
Calibration: open circuit, short circuit, load :
-
Measurement method selection :
automatic / manual
-
Trigger mode :
INT、MAN、EXT、BUS
-
Button lock :
-
Simultaneous measurement :
L-RDC
-
Data record :
-
Auto LCZ :
ON / OFF
Product Information
Language
中文
