100 MHz Bench Oscilloscopes USB (Type-C), LAN Interface Display 2 Channel CAT II 400V Save, AWG

Product Introduction

Measurement Specification

• Model : VDS 6102A
• Bandwith : 100MHz
• Channel : 2 analog channel + signal source output channel
• Instant sampling rate : up to 1GSa/s
• Rise Time : (typical ≤3.5 ns on BNC)
• Time base range : 5ns/div～100s/div, step by 1～2～5
• Sampling mode: : normal sampling, peak detection, average
• Storage depth : 10M
• Input coupling : DC, AC, ground
• Input impedance : 1MΩ±2%, in parallel with 15pF±5pF
• Time base accuracy : ±25ppm
• Time interval (△T) Measurement accuracy : Single: ±(1 sampling interval time+100ppm×reading+0.6ns), >16 average values: ±(1 sampling interval time+100ppm×reading+0.4ns)
• Vertical sensitivity : 2mV/div～5V/div
• Vertical Resolution : 14bits
• Maximum input voltage : 40V Peak（DC + AC Peak ）
• Bandwidth limited : to 20 MHz, full bandwidth
• Probe attenuation coefficient : 1X, 10X, 100X, 1000X
• Channel-to-channel isolation : 50Hz: 100: 1, 10MHz: 40: 1
• Waveform Interpolation : Sin(x)/x ±2 V (2 mV/div – 50 mV/div);
• Displacement range : ±20 V (100 mV/div – 500 mV/div); ±40 V (1 V/div – 5 V/div)
• Single bandwidth low frequency response : Full bandwidth low (AC coupled, -3Db) ≥5Hz (on BNC)
• DC gain accuracy : ±2%
• Trigger Type Signal System and Line/Field Frequency (Video Trigger Type) : Edge trigger, pulse width trigger, video trigger, slope trigger
• Trigger mode : automatic, normal, single
• Cursor measurement : Voltage difference between cursors (△V), time difference between cursors (△T)
• Automatic measurement : peak-peak value, average value, rms value, frequency, period, maximum value, minimum value, top value, bottom value, amplitude, overshoot, preshoot, rise time, fall time, positive pulse, negative pulse Wide, Positive Duty Cycle, Negative Duty Cycle, Delay A→B, Delay A→B
• Lissajous graphics bandwidth : full bandwidth Phase difference ±3 degrees
• Standard interface : USB (Typ-c); LAN interface, WIFi interface (optional wireless adapter) Power supply ≤2.5W

Product Information

• Size : 190mm(L)×18mm(H)×120mm(W)
• Weight: : about 0.30 kg (main unit)
• Packaging accessories : Probe/calibration pen/USB data cable/adapter/power cord/silicone sleeve/product manual/driver CD/soft bag