TECPEL ZG-106 CO2 and Thermometer

Product Introduction

Measurement Specification

• CO2 Measuring Range : 0~3,000 ppm
• Temperature Measuring Range : 0~50°C
• CO2 Resolution : 1ppm @ 0~1,000ppm
• Temperature Resolution : 0.1°C (0.1°F)
• CO2 Accuracy : ±50ppm @ When lower 1,000ppm，the other is 5%
• Repeatability : ±20 ppm
• Temperature Coefficient : Reading Value ±0.1% or ±2 ppm, Take the largest value at 25°C
• Pressure Coefficient : 0.13% of Reading value / MmHg (It can input correct height by user))
• Opening Time : The concentration value will be displayed for about 15 seconds after power on
• Reaction Time : Approx. 2 Mins (63% changing )
• Warm-up Time : Lower than 60 Sec. at 22°C (Time to complete)
• Display Choice : °F / °C, or Off.

Product Features

• DATA LOGGING : It can record 48 CO2 and temperature values measured in the past 24 hours, one record every 30 minutes
• MAXIMUM AND MINIMUM FUNCTION : It can record the maximum and minimum measured values of CO2 since the device is turned on
• ALARM : Alarm when CO2 concentration reach 1000ppm，1000ppm is ASHRAE recommend limit。It can also adjust the ppm value of alarm setting or cancel the alarm function by user
• RESTORE FACTORY MODE : After ZG-106 is adjusted, changed or damaged, the factory settings can be restored
• Multi-mode Adjustment Mode : Altitude Mode, Alarm Mode, Outdoor Mode, User Calibration Mode, Data-Log Mode

Product Information

• Working Environment : 0~50°C / lower than 95%RH without dew。
• Storage Environment : -10~40°C / lower than 70%RH without dew。
• Elevation Limitation : Lower than 1,000 meters
• Sensor : NDIR (Non-dispersive infrared)
• Power Supply : DC 1.5V AA Battery x 4 or DC6V
• Battery Life : approx 80h
• Dimension : 166 × 81 × 26 mm
• Weight : 273.6 g (Battery Including)
• Accessory : Instruction Manual、Battery