D-177 Bluetooth waterproof Digital infrared thermometer with thermocouple probe HACCP
Model: D-177 -60~350°C (-76~662°F)
Infrared thermometer with a built-in contact thermocouple probe. This dual-sensor thermometer is very useful and requires both non-contact and contact temperature measurement. This model has food-grade HACCP requirements and is designed for foodservice applications.
SPECIFICATIONS
infrared probe Temperature range -60~350℃ -60~350℃ Operating temperature 0~50℃
Accuracy (measured at 15~35℃
Ambient temperature 25℃) ±0.6℃ Below -5: ±1℃ -5~65:±0.5℃ Above 65:±1%
Accuracy (ambient temperature 23±3℃) -60~0:±(1℃+0.1/degree) 0~65:±1℃ 65~350: ±1.5% of reading
Resolution (-9.9~199.9) 0.2℃ / other range 1℃
Emissivity Default 0.95, can be set from 0.10 to 1.00
Distance: SPOT 8:1 to target ratio
IP rating IP54
Display LCD screen
HACCP Indication Below 4°C/Above 60°C: Green Backlight 4~60℃: Red backlight
Power AAA 1.5V battery X2
Automatic shutdown about 30 seconds
Battery life about 18 hours of typical use
Dimensions 39.5x53.9x158mm
Weight 160 grams (including battery)
Digital handheld infrared thermometer with
Thermocouple Probe D-177
Infrared thermometer Application Fields:
For Food factory, cement factory, electronic machinery factory, textile factory, steel factory, air conditioning refrigeration, printing factory, biochemical pharmaceutical factory, etc.
Application notes:
1. The infrared thermometer can obtain accurate temperature via infrared transmission without touching the object, as long as the infrared ray is aligned. The measured object can obtain the precise temperature of the measured object in less than 1 second.
2. How to choose an infrared thermometer:
a. Select the desired temperature range
b. Confirm the measured object:
B-1. Material: Infrared thermometer is not suitable for measuring metal materials that reflect light. To measure this material, apply black paint as temperature transforming material or Adhesive tape with a reflectance of 0.95
B-2. Size : Usually the object to be measured must have a minimum diameter of 20 mm or more.
(If you have special requirements, please contact us; if you need to measure small objects 2.5mm, you need to use OPTEX PT-3S. Please refer to the website.
http://www.oka.com.tw/tw/p/Product-2002102211594_32.html
B-3. Measuring distance: determined by D: S value: The greater the D:S ratio, the farther the measurable distance is. For example, the above figure shows
c. Emmisivity (0.1 ~ 1): The Emmisiviity of each object is not the same, the general object measurement setting is 0.95 for normal material.
e. Application of emmisivity meter
