Digital clamp meter 1500A AC/2000A DC Trms + Bar graph

Model: DCM-2608 (Discontinued and replaced by DCM-2608D)

 This Tecpel® clamp meter dcm-2608 is a handheld 4000-count clamp multimeter that is designed for use in the laboratory, field servicing, at home, and any circumstance where high current measurement is required.

The rugged clamp meter from Tecpel® is built with a design of finger guard which ensures users operating this great tool under a safety situation; a rugged plastic case that is a shock resistant and fire retardant; and electronic overload protection for all functions and ranges. In addition, a soft carrying case is available for easy portability of the meter and avoiding damage.

Features:   

1. 3 3/4 digit display (4000 counts)
2. AC current up to 1500A;DC current up to 2000A
3. AC voltage up to 750V;DC voltage up to 1000V
4. Resistance up to 40MΩ
5. Frequency up to 400kHz
6. Capacitance measurement
7. Audible continuity test / Diode test
8. Over range indication
9. Max/Min recording mode
10. Relative mode to read offset values (Zero Ωkey)
11.Peak hold for transient measurement
12.Confirm to the IEC-1010-1 ,
UL1244/UL3111, CE standard
13. Hand guard protection
14. Carrying case.

• Specifications:

  DCM 2608

  Display: 3 3/4 digit(4000 counts), 9999 counts(Frequency Mode), 42 segment Analog bar graph and function/units sign annunciators.

  DC Voltage Ranges:

  400mV,4V,40V,400V,1000V, ±(0.5%+1dgt)

  AC Voltage Ranges:

  400mV,4V,40V,400V,750V,±(1.5%+4dgts)

  AC Current Ranges:

  200A,1500A,±(1.5~5%+5dgts)

  DC Current Ranges: 200A,1000A,±(1.5~5%+5dgts)

  Resistance Ranges: 400Ω,4kΩ,40kΩ,400kΩ,4000kΩ,40MΩ, ±(1.0%+4dgts)

  Continuity Test: Audible indication<40Ω/Diode Test 0.6mA,approx.

  Polarity: Automatic (-) negative polarity indication.

  Overrange indication: MSD (Most Significant Digit) blinks.

  Lower Batery indication: the "battery sign" is displayed when the battery voltage drops below accurate operating level.

  Measurement rate: 2/sec. nominal 1/sec. Capacitanc and Frequency mode. 20/sec. Analog display.

  Operating Environment: 0 &degC to 50 &degC at < 70% RH

  Storage Environment: -20 &degC to 60 &degC at 80% RH

  Temperature Coefficient: 0.1 x (specified accuracy)/ &degC ( < 18 &degC or > 28 &degC)

  Auto Power Off: 30 minutes after rotary switch or mode changes.

  Altitude 6561.7 Feet (2000M)

  Power : One standard 9-Volt battery, NEDA 1604, IEC 6f22, jis 006P

  Battery Life: 100 Hours typical with alkaline battery.

  Jaw Opening Capacity: 57 mm conductor , 70 x 18 mm bus bar.

  Weight: Approx. 18.9 OZ/ 540 g grms (including battery).

  Dimensions: 10.9"x4.0"x1.9" (277x102x49mm)

  Accessories: Test leads; soft carrying case, battery, and owners manual