D-175 waterproof Digital infrared thermometer with thermocouple probe HACCP
Model: D-175 -55~250°C (-67~482°F)
Infrared thermometer Food
Tecpel D-175 Feature
- Zone Display: Clearly indicate the Food is under a dangerous(4~60°C/40~140°F) or safe zone
- 2in1 design: Infrared + Foldable Thermocouple Probe
- IP65 Protection
- Bright White LED as a pointer
- Ultra-Thin Design, fit into a shirt pocket
- NIST traceable: Certificate of Calibration Available (COC Optional)
- IR-SoC technology (Infrared System on Chip) and Batch Calibration technology drive the dimensions and cost to the lowest limits
- Max; Min and Lock modes
- Retractable probe
- Dual Display
- Auto Power-off
Specification Tecpel D-175 Infrared thermometer with thermocouple
Model No |
D-175 |
Description |
IRT + Probe |
IP Classification |
IP 65 |
Measurement range |
-55~250°C( -67~482°F) |
Infrared Accuracy (Tamb=23+/ -3°C) |
(Temp obj=-33~0°C):+/-(1°C +0.1/degree) |
Thermocouple Accuracy |
below -5 :+/-1°C,-5~ 65 : +/-0.5°C,above 65 :+/-1% of reading |
Distance: Spot |
2.5:1 |
Mode |
Max, Min, Lock, Food Code Zone Display |
Infrared thermometer Application Fields:
For Food factory, cement factory, electronic machinery factory, textile factory, steel factory, air conditioning refrigeration, printing factory, biochemical pharmaceutical factory, etc.
Application notes:
1. The infrared thermometer can obtain accurate temperature via infrared transmission without touching the object, as long as the infrared ray is aligned. The measured object can obtain the precise temperature of the measured object in less than 1 second.
2. How to choose an infrared thermometer:
a. Select the desired temperature range
b. Confirm the measured object:
B-1. Material: Infrared thermometer is not suitable for measuring metal materials that reflect light. To measure this material, apply black paint as temperature transforming material or Adhesive tape with a reflectance of 0.95
B-2. Size : Usually the object to be measured must have a minimum diameter of 20 mm or more.
(If you have special requirements, please contact us; if you need to measure small objects 2.5mm, you need to use OPTEX PT-3S. Please refer to the website.
http://www.oka.com.tw/tw/p/Product-2002102211594_32.html
B-3. Measuring distance: determined by D: S value: The greater the D:S ratio, the farther the measurable distance is. For example, the above figure shows
c. Emmisivity (0.1 ~ 1): The Emmisiviity of each object is not the same, the general object measurement setting is 0.95 for normal material.
e. Application of emmisivity meter
