Phase Sequence Tester- Non Contact

Non-contact Phase Sequence Detector

It has the dual functions of detecting lack of phase and phase sequence.
Clamp the alligator clip to the outside of the power cord to detect
Comes with four powerful magnets

1. Phase sequence detection (positive phase, anti-phase, default phase), live line inspection, simple electrical inspection, fire line identification, default phase judgment, broken line location search, DC line break point detection, line maintenance.

2. Phase Sequence State: dynamic acoustic-optic indication

3. Line voltage: 70~1000V

4. Clamp wire diameter: Φ1.6mm - Φ16mm

Non-contact Phase Sequence Detector with non-contact phase sequence detection, live line inspection, simple electrical inspection, fire line identification, default phase judgment, broken line location search and other functions, can clamp the wire with outer diameter Φ1.6mm?Φ16mm, When using, the insulation clamp can be directly clamped on the insulation skin of the live wire to test, no need to stripping off the wire or touching the exposed live wire of high voltage. The measurement result is dynamic display of LED, which is very clearness and directness, improves the safety and convenience of the test, and practically protects the personal safety of the operators.

The bottom plate of the instrument is equipped with magnets, the instrument can be attached to the metal shell of the equipment in the test, which makes the operation more convenient. The three clamps adopt 3 colors of the out shell, which is more in line with the distinction of three-phase line and the national standard (GB681).

MAIN FEATURES:

- Non-contact detector clips; no metal contact points to
provide greater safety
- Two functions in one unit: open phase and phase sequence detection
- Designed for checking a wider range of 3-phase power
sources
- LED display lights with buzzer indicator
- Brightness button feature for better visibility in dimly lit
areas or sunlight
- Magnetic mounting feature

SPECIFICATIONS
Measurement principle Static induction
Input voltage 75-1000 Vac
Frequency range 45-65 Hz
Auto-off 5 min. after power on
without detection
Low battery warning Power LED flashes at 7V ± 0.2 or less
Operating temperature & humidity 0°C ~ 40°C Max. 80% R.H.
Storage temperature & humidity -10°C ~ 50°C Max. 80% R.H.
Cable length Approx. 800mm
Dimensions 128(L) × 72(W) × 44(D)mm
Weight (battery included) Approx. 380g
Power source 9V (6LF22) × 1
Safety standard EN 61010-1 CAT III 1000V / CAT IV 600V EN 61326-1 EN 61557-1 EN 61557-7
Accessories : Instruction manual, Soft pouch

Live Wire Check

Non contact phase sequence tester Soft pouch and manual

Simply clip clamp on insulation wire , Non metalic contact