GWinstek LCR- 8200(A) High Frequency LCR Meter, RLC
Product Introduction
GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200(A), which has five models and the maximum test frequency is up to 50MHz. The entire series adopts 7-inch color display and features a high measurement accuracy (0.08%).
EQUIVALENT CIRCUIT MODEL ANALYSIS (“A” series only)
Features
Wide Test Frequency：
-- LCR-8200A:DC, 10Hz~50/30/20/10/5 MHz
-- LCR-8200:DC, 10Hz~30/20/10/5/1 MHz
7" LCD color Display
0.08% Basic Accuracy
Displaying Four Measurement Results Simultaneously From 17 Selectable Measurement Parameters Freely
15 Steps List Measurement
Two Curves Sweep Mode
Equivalent Circuit Model Analysis (LCR-8200A only)
Internal DC Bias Voltage ±12V
USB Storage Available
ALC Function Available
Standard Interfaces: RS-232C, USB Host/Device, LAN, GPIB and Handler
Universal Power Input
Measurement Specification
-
Display Screen :
7" LCD color display (800x480)
-
TEST FREQUENCY LCR-8250A :
DC, 10Hz~50MHz; 6 Digits, ±0.0007%
-
Test Frequency LCR-8230A :
DC, 10Hz~30MHz; 6 Digits, ±0.0007%
-
Test Frequency LCR-8220A :
DC, 10Hz~20MHz; 6 Digits, ±0.0007%
-
Test Frequency LCR-8210A :
DC, 10Hz~10MHz; 6 Digits, ±0.0007%
-
Test Frequency LCR-8205A :
DC, 10Hz~5MHz; 6 Digits, ±0.0007%
-
Test Frequency LCR-8201 :
DC, 10Hz~1MHz; 6 Digits, ±0.0007%
-
OUTPUT IMPEDANCE :
25Ω / 100Ω SELECTABLE
-
Test Signal :
AC Voltage: AC Current: DCR Voltage: 10mV ~ 2Vrms (FREQ. ≦ 1MHz), 10mV ~ 1Vrms (FREQ. > 1MHz or FREQ. ≦ 1MHz and RO=25Ω) 100μA ~ 20mArms (RO=100Ω), 200μA ~ 40mArms (RO=25Ω) 1Vdc (40mA max.)
-
BASIC ACCURACY :
±0.08%
-
TEST SPEED :
MAX: 2.5ms(>10kHz), FAST: 50ms(>20Hz), MEDIUM: 100ms SLOW: 300ms, SLOW2: 600ms
-
LIST MEASUREMENT :
Listed Steps: Listed Parameters: Trigger: 15 Freq/Vac/Iac/DC Bias/Comp/BIN AUTO, REPEAT, SINGLE
-
Measurement Parameter :
Maximum four parameters can be measured and displayed at the same time Impedance (Z), Inductance (Ls / Lp), Capacitance (Cs / Cp), AC Resistance (Rs / Rp), Quality Factor (Q), Dissipation Factor (D), Admittance (Y), Conductance (G), Reactance (X), Phase Angle (θd / θr), Susceptance (B), DC Resistance (Rdc)
Product Features
-
SWEEP MEASUREMENT :
Swept Graphical: Swept Parameters: Two of measurement parameters Freq/Vac/Iac/BIAS V, Keep Trace
-
EQUIVALENT CIRCUIT MODEL ANALYSIS (“A” series only) :
7 different equivalent circuit models. The 3-components analysis model is composed of 4 types, and the 4-components analysis model covers 3 types.
-
OTHER FUNCTIONS Auto Level Control (ALC): DC Bias: Handler: Standard 0 ~ ±12V PASS, FAIL and OK, NG or BIN 1-9 :
Auto Level Control (ALC): DC Bias: Handler: Standard 0 ~ ±12V PASS, FAIL and OK, NG or BIN 1-9
-
OTHER FEATURES :
Correction: V/I Monitor: Comparator: Buzzer: Average: Open/Short/HF Load/Load Vac, Iac, Vdc, Idc Value, Δ , Δ % OFF, Pass, Fail 1 to 64
Product Information
Language
中文
